KAKA Industrial TR-50 Operation Manual

Operation Manual
KAKA Industrial
Unpacking
T h e Tu b e R o l l e r i s s h i p p e d f r o m t h e
manufacturer in a carefully packed ply-wood
case. Thoroughly inspect the product upon
opening the package.
Thoroughly inspect the product upon opening
the package. After unpacking the unit,
carefully inspect for any damage that may
have occurred during transit. Check for loose,
missing, or damaged parts. Immediately report
missing parts to dealer.
If damage has occurred, shipping damage
claims must be filed with the carrier and are
the responsibility of the user.
Specifications
RBM20
RBM20
Size Prafile Type
SIZE
SIZE
1"
1
1 "
/
2
5
1 "
/
8
3
1 "
/
4
2"
1
"
/
2
3
"
/
4
1"
WARNING
The warnings, cautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions or situations
that could occur. It must be understood
by the operator that common sense and
caution are factors which cannot be built
into this product.
Spec Min.Φ Notes
SPEC.
SPEC.
Φ 25.4mm
330mm
Φ 38.1mm
350mm
Wall thickness <2mm
Wall thickness <2mm
Φ 41.3mm
360mm
Wall thickness
Less feeding amount
< 2 m m L e s s
Less feeding amount
Φ 44.5mm
360mm
feeding amount
to make sure
to make sure
to make sure the
Φ 50.8mm
370mm
roundness of tube
r o u n d n e s s o f
roundness of tube
tube
12.7mm
340mm
19.0mm
340mm
25.4mm
350mm
Important:
The tube roller is coated with a protectant.
To ensure proper fit and operation, remove
coating. Coating is easily removed with mild
solvents, such as mineral spirits, and a soft
cloth. Avoid getting cleaning solution on paint
or any of the rubber or plastic parts. Solvents
may deteriorate these finishes. Use soap and
water on paint, plastic or rubber components.
After cleaning, cover all exposed surfaces with
a light coating of oil.
Appearance of the machine
WARNING
Never use highly volatile solvents. Non-
the
the
flammable solvents are recommended to
avoid possible fire hazard.
SAVE THESE INSTRUCTIONS
Thank you for purchasing TR-50 Tube Roller
machine. Before attempting to operate your
new tool please read these instructions
thoroughly. You will need these instructions for
the safety warnings, precautions, assembly,
operation, maintenance procedures, parts
list and diagrams. Keep your invoice number
— 1 —
®
TR-50