Analog" Tab - IBA MS8xICP Manual

ibaMS8xICP
 Cutoff frequency
You can enter a value in Hz or you can set it to „Auto". When it is set to "Auto" the
cutoff frequency is equal to one third of the sampling frequency.
Permissible values: 100 Hz ... 0,5*sampling rate
The entry "0" Hz corresponds to the setting "Auto".
9.1.2

"Analog" tab

The following settings apply to the "Analog" tab:
Figure 10: I/O Manager ibaMS8xICP – Analog tab
Manual
Issue 1.7
21