Update Via Web Interface; Update Via Ibapda - IBA MS8xICP Manual

Important note
When updating the iba-modular system, a possible autostart of the ibaLogic PMAC is
deactivated and the existing ibaLogic-V5 application deleted. Furthermore, an update
of the ibaLogic-V5 software (ibaLogic Clients) might be necessary.
8.3.1

Update via Web Interface

Important note
The Web interface is available only with the central unit ibaPADU-S-IT-2x16.
 Start the website of the iba-modular system in your browser and select the central
unit.
 On the "update" tab, click on the <Browse...> button and choose the
<padusit2x16_ v[xx.yy.zzz].iba> update file.
 By clicking on <Start Update>, you start the update.
Figure 4: Update via Web interface
8.3.2

Update via ibaPDA

 Open the ibaPDA I/O Manager and choose your iba-modular system in the tree
structure.
 On the "Diagnostics" tab, click on the <Write firmware> button and choose the
„padusit2x16_v[xx.yy.zzz].iba" or „paduscm_v[xx.yy.zzz].iba" update file.
 You start the update by clicking on <OK>.
Figure 5: Update via ibaPDA
16
Manual
Issue 1.7
ibaMS8xICP