Figure 12: Outputs ibaMS8xICP
If "Buffered Access" is enabled, you can see additional input and output signals.
Note
You need to apply the "Buffered Access" by clicking on the <Apply> button. Only then,
you will see additional signals in the signal tree that can be configured as output or input
resources.
Signal
Inputs
AI_Icp_Ch[00...07]
StatusIn
StatusOut
Outputs
Gain_Ch[00...07]
Additional input signals for buffered access
AI_Icp_Ch[00...07]_buf
BufferFillCount
24
Manual
Description
Analog input signals
Status information about the plugged input module (for
output module without function):
0 = Module not initialized
1 = Module running
>1 = Mistake (e.g. module cannot be initialized)
Status information about the plugged module (for input
module without function):
0 = Module not initialized
1 = Module running
>1 = Mistake (e.g. module cannot be initialized)
Gain factor per channel
Input buffer of analog input signals
Counter, when buffer is filled
Issue 1.7
ibaMS8xICP