4 PaIrIng tHe BluetootH SySteM wItH otHer BluetootH DevIceS
2. Select Stryker in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Note:
• The phone paring mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
4.1.2 Pairing When the Stryker is Turned Off
1. While the Bluetooth system is off, press and hold the Center Button
and the (+) Button until the LED flashes red and blue alternately and
you hear a voice prompt, "Phone pairing".
=
2. Select Stryker in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
HOLD
Stryker Motorcycle Bluetooth
Bluetooth
Stryker
Pi
Device B
Blinking
" Phone pairing"
Bluetooth
Stryker
Pi
Device B
Helmet with Mesh Intercom™ | 24
®