Removing The Cheek Pads; Installing The Cheek Pads - Sena STRYKER User Manual

2 WeArIng tHe HelMet

2.8 Removing the Cheek Pads

1. Unsnap the two cheek pad fasteners and detach the one hook from
the helmet.
2. Remove the cheek pad by pulling it upward.
3. Repeat the process on the opposite side.

2.9 Installing the Cheek Pads

1. Pass the chinstrap through the hole in the cheek pad, and insert the
cheek pad's plastic plate into the space between the shell and EPS.
2. Snap the two cheek pad fasteners and engage the one hook into
place.
3. Repeat the process on the opposite side.
Stryker Motorcycle Bluetooth Helmet with Mesh Intercom™ | 16
®