Mobile Phone Pairing; Initially Pairing The Outstar; Pairing When The Outstar Is Turned Off - Sena OUTSTAR User Manual

PAIRING THE BLUETOOTH SYSTEM WITH OTHER BLUETOOTH DEVICES

3.1 Mobile Phone Pairing

There are two ways to pair the phone.

3.1.1 Initially Pairing the OUTSTAR

The Bluetooth system will automatically enter the phone
pairing mode when you initially turn on the Bluetooth
system or in the following situations:
• Rebooting after executing the Factory Reset feature; or
•
Rebooting after executing the Delete All Pairings
feature.
1. Rotate while pressing the Jog dial clockwise for
1 second. You will hear a voice prompt, "Phone
pairing".
2. Select the OUTSTAR in the list of the devices
detected on the mobile phone. Enter 0000 for the
PIN. Some mobile phones may not ask for the PIN.
Note:
• The phone pairing mode lasts for 3 minutes.
•
To cancel phone pairing, tap the Jog dial.

3.1.2 Pairing When the OUTSTAR is Turned Off

1. Rotate while pressing the Jog dial clockwise for
5 seconds when the Bluetooth system is turned off.
You will hear a voice prompt, "Configuration menu".
2. Rotate the Jog dial until you hear a voice prompt,
"Phone pairing". Search for Bluetooth devices on
your mobile phone.
24