• This Quick Start Guide (Version 2.0.0) explains how to operate the SF2 with firmware version 2.0 or higher. • For the operation of the SF2 with a firmware version lower than 2.0, refer to the SF2 Quick Start Guide (Version 1.2.0) or lower.
Phone, Music Pairing Bluetooth Device A 10” Sena SF2 v.1.0 Device B Press ..Select Sena SF2 Bluetooth Bluetooth Bluetooth Device A Enter Device A Device A Sena SF2 v.1.0 Sena SF2 v.1.0 Sena SF2 v.1.0 Device B Device B Device B ..
10” Press Troubleshooting Factory Reset If you want to restore the Sena SF2 to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off. Fault Reset If the Sena SF2 is not working properly for any reason, reset by gently pushing the pin-hole reset button on the back of the main unit.
Page 9
(-) Button FM Radio** Scan up FM band Press the (+) Button for 1 second Stop scanning Press the (+) Button for 1 second Save preset while Tap the center Button scanning ** Available only in SF4 www.sena.com 2.0.0_EN_January2023 D00153_2.0_March2019...