Pairing When The M1 Evo Is Turned Off; Pairing When The M1 Evo Is Turned On - Sena M1 EVO User Manual

3 Pairing tHE BluEtOOtH SyStEM witH OtHEr BluEtOOtH DEVicES
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.

3.1.2 Pairing When the M1 EVO is Turned Off

1. Press and hold the (+) Button and Center Button for 10 seconds
when the M1 EVO is turned off.
Phone Pairing
=
"Phone Pairing"
Alternating blue and red flashing lights indicate the device
=
is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select M1 EVO
in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
=
PIN
NUMBER

3.1.3 Pairing When the M1 EVO is Turned On

1. Press and hold the Center Button for 5 seconds when the M1 EVO
is turned on.
Phone Pairing
=
HOLD
10s
HOLD
5s
M1 EVO Smart Mountain Bike Helmet | 15