Setting up and connection
HBS 261-2 / HBS 321-2 / HBS 361-2
1
15
14
13
12
Fig. 4: Wood Band Saw HBS 261-2 / HBS 321-2 / HBS 361-2
1 Handle screw saw blade tension
2 Star grip for locking the roller cover
3 Adjustment handle saw band guide
4 Circle cutter (optional)
5 Saw blade
6 Miter stop
7 Locking handle of the guide rail
8 Star handle for locking the roller cover
9 Handle screw saw blade tension
10 Chip containers
11 Underframe
12 Clamping lever for rip fence
13 Rip fence
14 ON / OFF switch
15 LED light switches
6.2 Optional accessories
Tips and recommendations
We recommend to use only high quality original Holz-
star accessories. Only with original accessories, a
flawless operation and optimal work results can be
guaranteed.
- Circular cutter for HBS 261-2 / HBS 321-2 /
HBS 361-2 Item number: 5912426
- Saw blades
10
7
7.1 Requirements for the place of operation
Remove the band saw from the packaging and all pro-
2
tective films. Do not set up or operate the machine in a
3
damp or wet environment. The air humidity should not
4
exceed 80% and the measured room temperature
5
should be between 5°C and 35°C. The machine should
6
not be operated in a humid or wet environment.
7
The installation or work area must be dry and well venti-
lated.
8
9
7.2 Set up the Wood Band Saw
10
11
To reduce noise, a rubber layer can be placed bet-
ween the machine and the workbench. This effectively
prevents vibrations and noise.
Risk of injury from an unstable machine!
Check the stability of the machine after setting it up on
stable ground.
In order to ensure sufficient stability of the machine, it
should be bolted to the ground. There are 4 holes at
the bottom of the machine housing for this purpose.
Do not overtighten the fixing screws of the base plate.
The base plate must not be distorted
Setting up and connection
NOTE!
CAUTION!
ATTENTION!
ATTENTION!
Use protective gloves!
Wear protective clothes!
Wear safety boots!
HBS Series | Version 1.02