Steering Lock Button; Power On/Off Position; Stop Position; Run Position - Triumph Speed Triple 1200 RS Owner's Handbook Manual

Steering Lock Button

Warning
For reasons of security and safety,
always make sure the steering lock
is on when leaving the motorcycle
unattended.
Any unauthorized
motorcycle may
the rider, other road users and
pedestrians and
damage to the motorcycle.
To lock the motorcycle,
handlebar fully to the left and press the
steering lock button.

Power ON/OFF Position

The Power ON/OFF position switches
the electrical
instrument display between on or off.
This allows access to the instrument
display without starting the engine.
Do not leave the switch in the Power
ON position for a long period of time
as this may cause damage to electrical
components and will discharge the
battery.
use of
cause injury
may also cause
turn
circuits and
Caution
General Information

STOP Position

The STOP position stops the engine.
Note
Although
stops the engine, it does not turn off
all the electrical circuits and may cause
difficulty in restarting the engine due to
a discharged battery.
the
to

RUN Position

The engine start/stop switch must be in
the RUN position for the motorcycle to
operate.
the

QUICK START Position

The QUICK START position operates the
electric starter allowing for a quicker
engine start.
From the ignition off, press and hold
the the engine start/stop switch in the
QUICKSTART position with all the correct
conditions met, to start the motorcycle.
For more information, see the page 86.

HOME Button

The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
to select between the main menu and
instrument display.
the engine stop position
59