Table of Contents
Advertisement
Caution
Stop the engine immediately if the low
oil pressure warning light illuminates.
Do not restart the engine until the
fault has been rectified.
Severe engine damage will result from
running the engine when the low oil
pressure warning light is illuminated.
Immobiliser/Alarm Indicator Light
This Triumph motorcycle is fitted with
an engine immobiliser which is activated
when the ignition switch is turned to
the OFF position.
Without Alarm Fitted
When the ignition switch is turned to
the OFF position, the immobiliser light
will flash on and off for 24 hours to
show that the engine immobiliser is on.
When the ignition switch is turned to
the ON position the immobiliser and the
indicator light will be off.
If the indicator light remains on it
indicates that the immobiliser has a
malfunction that requires investigation.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
With Alarm Fitted
The
immobiliser/alarm
only illuminate when the conditions
described
in
the
accessory alarm instructions are met.
light
will
genuine
Triumph
GENERAL INFORMATION
Hill Hold Indicator Light
The hill hold indicator light is
used to indicate that the hill
hold system is active and will
apply the rear brake to hold
the motorcycle position.
For more information on the hill hold
system, see page 108.
Hill Hold Indicator Light Operation
Under normal riding conditions the hill
hold indicator light will remain off.
When the hill hold system is activated,
the hill hold indicator light will be shown
in green and continue to stay green
until the hill hold system is unavailable.
The hill hold indicator light will be
shown in amber if the hill hold system is
unavailable.
Hill Hold Deactivated Indicator Light
The hill hold system can be
automatically
deactivated. If the hill hold
system is deactivated then
the amber hill hold deactivated indicator
light is shown.
Anti-lock Braking System (ABS)
Warning Light
When the ignition is switched
on, it is normal that the ABS
warning light will flash on and
off. The light will continue to flash after
engine start-up until the motorcycle
first reaches a speed exceeding 6 mph
(10 km/h) when it will go off.
Traction control will not function if
there is a malfunction with the ABS.
The warning lights for the ABS, traction
control and the MIL will be illuminated.
31
or
manually
Advertisement
Chapters
Table of Contents
