Introduction; About The Handbook; The Reader; Reference Documentation - Autronica AutroSafe Self Verify BSL-336 Handbook

1. Introduction

1.1 About the Handbook

1.2 The Reader

1.2.1 Reference Documentation

1.3 IEC Standard requirements

Interfacing Voyage Data Recorder Systems, AutroSafe Interactive Fire-Alarm System, 116-P-BSL336/EE, RevA 2007-01-25,
This handbook provides all necessary information required to install
and commission the BSL-336 VDR interface for AutroSafe Fire-
detection systems.
This handbook is designed for Autronica Fire and Security service
personnel, VDR supplier and classification societies.
In addition to this handbook, Autronica Fire and Security offers the
following documentation:
•
116-P-BSL336/CE Datasheet
According to ISO6112-1, the manual is required to contain the
following information:
a) Identification of lines A and B. Re. chapter 4.2
b) The output-drive capability as a talker. BSL-336 uses
standard RS422 integrated circuits. RS422 is by definition
identical to ITU-T X.27/V.11
c) A list of sentences transmitted as a talker. Re chapter 8.1
d) The load required as a listener. NOT APPLICABLE
e) A list of sentences required as a listener. NOT APPLICABLE
f) The current hardware and software version
a. VDR Converter BSL-336, HW version 3
b. Software release: 1.00
Re. chapter 3.1 – 3.2
g) Electrical description of the talker output. Ref. b) above.
h) Version number and time of update of the standard for which
compliance is sought. Re. chapter 2
Autronica Fire and Security AS
Page 3
Introduction