Using Setup Menu - Yaesu FTM-200DR Operating Manual

Using Setup Menu

The Set Mode permits configuring the various functions to accommodate individual
operating needs and preferences.
Setup Menu Operation
1. Press and hold the [F menu] key.
The Setup Menu screen will be displayed.
2. Rotate the DIAL knob to select the desired item in the
Setup Menu, then press the DIAL knob.
• Press the [SQL back] key to return to the previous
screen.
• Press the [UP] / [DWN] key on the microphone to jump
to the 17 categories in the Setup Menu below.
DISPLAY ↔
CONFIG ↔
SCAN ↔
DATA ↔
↔ CLONE ↔
3. When there is no deeper level of menu items, go to step 4.
When there is a deeper level of menu items, rotate the DIAL knob to select the desired
item, then press the DIAL knob.
4. Rotate the DIAL knob to change the setting value.
5. Press any key (except Power Switch) or PTT switch to finish the setting and return to
the original screen.
66
TX ↔ RX ↔
AUDIO ↔
DIGITAL ↔ GM ↔
APRS ↔ SD CARD ↔
RESET
MEMORY ↔
SIGNALING ↔
WIRES-X ↔
OPTION
Press and hold
DISPLAY
1 FREQUENCY INPUT >
2 LCD BRIGHTNESS
3 FREQUENCY COLOR
4 BAND SCOPE
>