Safety Instructions - Furuno FELCOM 250 Installation Manual

SAFETY INSTRUCTIONS

Read these safety instructions before you operate the equipment.
WARNING
CAUTION
Warning, Caution
WARNING
Do not open the equipment unless
totally familiar with electrical circuits
and service manual.
Only qualified personnel should work
inside the equipment.
Do not approach the radome closer
than 1.4 m (FELCOM 500) or 0.7 m
(FELCOM 250) when it is transmitting.
The radome emits radio waves which
can be harmful to the human body,
particularly the eyes.
RF power dendity
FELCOM500
on antenna aperture
2
100W/m
25W/m 2
2
10W/m
Turn off the power at the mains
switchboard before beginning the
installation. Post a sign near the
switch to indicate it should not be
turned on while the equipment is
being installed.
Fire, electrical shock or serious injury
can result if thepower is left on or is
applied while the eqiuipment is being
installed.
Indicates a condition that can cause death or serious injury if
not avoided.
Indicates a condition that can cause minor or moderate injury if
not avoided.
Prohibitive Action
FELCOM250
distance distance
-
-
0.4 m
0.5 m
1.4 m 0.7 m
WARNING
Ground the equipment to prevent
electrical shock and mutual
interference.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or damage the equipment.
Keep the following compass safe
distances to prevent interference to
a magnetic compass.
Unit
FELCOM 500
Antenna Unit
FELCOM 250
Antenna Unit
Communication Unit
IP Handset
Facsimile
Telephone
Incoming Indicator
AC-DC Power Supply
i
Mandatory Action
Standard Steering
compass compass
0.75m 0.40 m
0.70m 0.40 m
0.30 m
0.40 m
0.70 m
0.45 m
1.30 m
0.80 m
0.50 m 0.40 m
0.45 m 0.30 m
0.90 m 0.60 m