Pro-Form momentum L4.8 User Manual page 7

4. While another person holds the Console (23)
near the Upright (2), connect the console wire
to the Upper Wire Harness (44).
Insert the excess wire into the Upright (2).
Tip: Avoid pinching the wires. Attach the
Console (23) to the Upright (2) with four M6 x
18mm Screws (43).
5. While another person holds the Upright (2) near
the Frame (1), connect the Upper Wire Harness
(44) to the Lower Wire Harness (53).
Insert the excess wire downward into the Frame
(1). Next, slide the Upright (2) onto the Frame.
Tip: Avoid pinching the wires. Attach the
Upright with two M10 x 68mm Button Bolts (48),
two M10 Split Washers (59), and two M10
Locknuts (33). Do not tighten the Button
Bolts yet.
6. Identify the Left Pedal Arm (11), which is
marked with a "Left" sticker.
Attach a Pedal (13) to the Left Pedal Arm (11)
with two M6 x 45mm Flat Head Screws (36).
Attach the other Pedal (not shown) to the
Right Pedal Arm (not shown) in the same
way.
All manuals and user guides at all-guides.com
7
4
Console Wire
44
43
5
2
59
33
44
53
1
6
11
23
Avoid pinching
the wires
2
48
Avoid pinching
the wires
36
13