Pro-Form momentum L4.8 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.
Identify the Front Stabilizer (10), which is nar-
rower than the Rear Stabilizer (not shown).
While another person lifts the front of the Frame
(1), attach the Front Stabilizer to the Frame with
two M10 x 75mm Carriage Bolts (34) and two
M10 Locknuts (33).
2. While another person lifts the back of the Frame
(1), attach the Rear Stabilizer (28) to the Frame
with two M10 x 75mm Carriage Bolts (34) and
two M10 Locknuts (33).
3. The Console (23) can use four AA batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the battery cover, insert the bat-
teries into the battery compartment, and reat-
tach the battery cover. Make sure to orient the
batteries as shown by the diagram inside
the battery compartment.
All manuals and user guides at all-guides.com
6
1
34
10
1
2
33
1
3
23
33
33
33
28
34
Tab
Battery
Cover
Batteries