Case 2: Change Settings With Brc301B61 - Daikin VAM-J8 Series Manual

17 | Configuration
Installer and user reference guide
70
1 Briefly press a button to turn on the screen light.
2 Press and hold the Cancel button (a) for at least 4 seconds to enter the Service
Settings menu.
3 Go to Field Settings with the Up/Down buttons and press the Menu/Enter
button (b).
4 Press the Left/Right buttons to highlight the number under Mode.
5 Press the Up/Down buttons to select the required mode number.
Result: From mode 20 and up, you also have to select a unit number for
individual control.
6 Use the Left/Right buttons to highlight the number under Unit No..
7 Use the Up/Down buttons to select an indoor unit number. Selecting a unit
number is NOT necessary when configuring the entire group.
8 Use the Left/Right buttons to select a switch number (0 to 15) to change.
In case of individual settings:
Field Settings
Unit No. Mode
0 20
Return Setting
In case of group settings:
Field Settings
Mode
10
Return Setting
9 Use the Up/Down buttons to select the required position number.
10 Press the Menu/Enter (b) button and confirm the selection with Yes.
Field Settings
Save the settings?
Yes No
Return Setting
11 After you have completed all changes, press the Cancel button (a) twice to
return to the normal mode.
a Cancel button
b Menu/Enter button

Case 2: Change settings with BRC301B61

Make sure that the switch box lid on the heat reclaim ventilation unit is closed.
1 With the unit in normal mode, press the Inspection/Trial button (a) for more
than 4 seconds to enter the local setting mode.
b
a
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08