Daikin VAM-J8 Series Manual page 84

17 | Configuration
Time to clean filter indication
To remove the Time to clean filter indication
About error indications
Installer and user reference guide
84
Mode
Bypass mode
When the filter pressure drop becomes too large, the following message or icon is
displayed at the bottom of the basic screen: Time to clean filter or
filters. For more information, see
Cool
Set to
28
°C
Time to clean filter
1 Press the Menu/Enter button.
2 Press the Up/Down buttons to select Reset Filter Indicator.
3 Press the Menu/Enter button.
Result: You return to the basic screen. The Time to clean filter indication is no
longer displayed.
Main Menu 1/3
Reset Filter Indicator
Airflow Direction
Individual Air Direction
Quick Start
Ventilation
Energy Saving Options
Return Setting
Cool
Set to
28
°C
If an error occurs, there is an error icon in the basic screen and the operation lamp
blinks. If a warning occurs, ONLY the error icon blinks and the operation lamp does
NOT. Press the Menu/Enter button to display the error code or warning and
contact information.
Cool
Set to
28
°C
Error : Push Menu Button
The error code blinks and the contact address and model name appear as shown
below. In this case, notify your dealer about the error code.
Error Code:A1
Contact Info
0123 – 4567 – 8900
––– /000
Indoor Model
––– /000
Outdoor Model
Return
Description
The outdoor air bypasses the heat exchange
element. This means that outdoor air is
supplied to the room without heat exchange
with the room air.
"8 Maintenance and service" [
. Clean the
4
25].
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08