Daikin VAM-J8 Series Manual page 92

17 | Configuration
To install the CO₂ sensor
Installer and user reference guide
92
f
a Hinge mechanism
b Service cover
c Heat exchange element
d Air filter
e Heat exchange element rail
f Screw 1
g Screw 2
1 Open the service cover hinge by loosening the screw.
2 Remove the service cover.
3 Remove the 2 heat exchange elements and the 4 air filters.
4 Remove the screw from the right heat exchange element rail.
5 Remove the heat exchange element rail.
6 Loosen screw 2, and remove screw 1.
INFORMATION
Use a crosshead screwdriver with a shank of more than 65 mm and a total length of
less than 120 mm.
a Screw 1
b Screw 2
c Damper motor wire
d Clamp
1 Use the 2 screws to install the CO₂ sensor. See
4
components" [ 91] for details.
NOTICE
Make sure that the damper motor wire is NOT trapped under the kit.
g
c
b
a
d
"To remove the
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08