Fertilizer Box - Clean Out - Landoll 5211 Operator's Manual

Fertilizer Box – Clean Out
1. The fertilizer meters
maintenance or cleaning by removing the door
located at the bottom of the fertilizer meter assembly
See Figure 4-17.
2. Remove any remaining dry fertilizer from inside the
fertilizer compartment. Be prepared to catch the
remaining fertilizer before opening the door. Position
the drill over a smooth, clean, dry surface, or spread
out a tarp below the box. Release and unhook the
SEED BOX
DOOR LATCH
FERTILIZER
WHEEL METER
4-14
TABLE OF CONTENTS
may be accessed for
Figure 4-17: Fertilizer Box Clean Out
latches and allow the door to swing forward.
3. Dry fertilizer is very corrosive and absorbs moisture.
Clean out any fertilizer as soon as possible after using
the drill.
4. Storage – before storing the drill for extended periods,
clean out any remaining seed and fertilizer from the
boxes. Remove the fertilizer doors on the outside of
the box and fertilizer covers on the inside of the box.
Use water to wash out any remaining fertilizer within
the boxes and in the fertilizer meter assemblies.
SEED METER
FERTILIZER DOOR
F-725-0122