Table of Contents
Advertisement
Safety Decals and Reflectors
The 5211 grain drill is equipped with all safety signs
installed for safe operation.
For you safety:
• Carefully read and follow safety sign directions.
• Keep the safety signs clean and visible.
• Replace damaged, missing, or illegible safety signs.
• Be sure any new equipment or repair parts include
safety signs.
P/N 224513
Hose ID Grain Drill
Front of hitch, pull hitch option only
QTY. 1
P/N 8-573-010084
Warning: Before Operating
WARNING
1.
BEFORE OPERATING - STUDY OPERATORS MANUAL SAFETY
MESSAGES AND SAFE OPERATING PROCEDURES. READ SAFETY
SIGNS ON THIS MACHINE.
2.
TRANSPORT ON PUBLIC ROADS - OBSERVE FEDERAL, STATE,
AND LOCAL REGULATIONS; DISPLAY SMV EMBLEM; ATTACH
PROPER STRENGTH IMPLEMENT SAFETY CHIAN; AND LIMIT
MAXIMUM SPEED TO 20mpg (32km/h)
3.
LOWER OR BLOCK ALL ELEVATED COMPONENTS BEFORE SER-
VICING OR LEAVING THIS MACHINE.
Front of hitch, pull hitch option
QTY. 1
P/N 8-573-010084
Warning: Before Operating
WARNING
1.
BEFORE OPERATING - STUDY OPERATORS MANUAL SAFETY
MESSAGES AND SAFE OPERATING PROCEDURES. READ SAFETY
SIGNS ON THIS MACHINE.
2.
TRANSPORT ON PUBLIC ROADS - OBSERVE FEDERAL, STATE,
AND LOCAL REGULATIONS; DISPLAY SMV EMBLEM; ATTACH
PROPER STRENGTH IMPLEMENT SAFETY CHIAN; AND LIMIT
MAXIMUM SPEED TO 20mpg (32km/h)
3.
LOWER OR BLOCK ALL ELEVATED COMPONENTS BEFORE SER-
VICING OR LEAVING THIS MACHINE.
Front of frame, 3-point option
QTY. 1
TABLE OF CONTENTS
8-573-010084
8-573-010084
New safety signs may be ordered from your Landoll
dealer. Refer to this section for parts and proper safety
sign placement.
To Install new safety signs:
1. Remove the old damaged safety sign if still present.
2. Clean placement area to remove any dirt or grease.
3. Remove backing from new safety sign.
4. Apply the safety sign starting from one end pressing
firmly and working across the safety sign being
careful not to create any air bubbles.
1-5
Advertisement
Table of Contents
