Specifications; Important Safety Precautions; Work Area - pro.point 8345381 User Manual

8345381
Fluxchipper and
Needle Scaler Kit
INTRODUCTION
2 tools in 1! Use the chisel tips to chip away hard materials such as welding flux, or use the needle scaler attachment
for lighter material removal, such as rust or paint from metal surfaces.

SPECIFICATIONS

IMPORTANT SAFETY PRECAUTIONS

WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this tool,
make sure they are aware of all safety information.

WORK AREA

1. Operate in a safe work environment. Keep your work area clean and well lit. Do not use in damp or wet
locations and do not expose this tool to rain. Do not use in the presence of flammable gases or liquids.
2. Keep anyone not wearing appropriate safety equipment away from the work area. Distraction can cause you
to lose control.
3. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock
up tools and keep them out of reach of children.
For technical questions call: 1-800-665-8685
No load speed
Average Air Consumption
Hose Size
Air inlet
Weight
4,600 BPM
10 CFM @ 90 PSI
3/8" I.D.
1/4" NPT
8.6 lb
V 1.01
3