Speed Alarm; Water Temperature Alarm - Furuno RD-30 Operator's Manual

1. OPERATION
1.7.2

Speed alarm

The speed alarm warns when your boat's speed is lower or higher than the speed
setting, or is inside or outside of the speed range setting.
1. Press the [MENU] key once or twice to show the main menu.
2. Select ALARM1 and then press the [ENT] key.
3. Select SPEED and then press the [ENT] key to show the speed alarm options
window.
4. Select alarm type desired and then press the [ENT] key.
OFF:
LOW:
HIGH:
INSDE:
OUTSD: Alarm triggered when speed is outside of the speed range setting.
5. If you turned on the alarm, press the [ENT] key and then use the cursor pad to
enter the alarm setting: Use ◄ or ► to select location, and press ▲ or ▼ to enter
value. For INSDE and OUTSD, enter lower value on top, higher value below.
6. Press the [ENT] key.
7. Press the [MENU] key twice to close the menu.
1.7.3

Water temperature alarm

The water temperature alarm warns when the water temperature is lower or higher
than the temperature setting, inside or outside of the temperature range setting, or
the temperature varies by the temperature set within one minute (shear).
1. Press the [MENU] key once or twice to show the main menu.
2. Select ALARM1 and then press the [ENT] key.
3. Select TEMP and then press the [ENT] key to show the water temperature
alarm options window.
1-16
Speed alarm options window
Turns off the speed alarm.
Alarm triggered when speed is lower than the speed setting.
Alarm triggered when speed is higher than the speed setting.
Alarm triggered when speed is inside the speed range setting.
Temperature alarm options window
OFF
LOW
HIGH
INSDE
OUTSD
OFF
LOW
HIGH
INSDE
OUTSD
SHEAR