Table of Contents
Advertisement
Assemble the Throttle Control Handle
•
Make sure the throttle lever should be at minimum
position on engine before start assembly.
•
Then, fix the Throttle Control Handle Ass'y to the
Lifting Handle. Make sure the top of handle bar
should touch the Butterfly Nut, and the bottom of
the handle bar should touch the pressure plate.
•
Fix the wires to the lifting handle, then use white
strap to tie up the rest wire to the lifting handle.
THROTTLE LEVER
WINGNUT
WIRE CAP
PRESSURE PLATE
WHITE STRAP
15
Advertisement
Table of Contents
