Viewing Stopwatch Data
This section explains how to send lap times
(up to 200 records) that are stored in watch
memory, as well as other data to your phone
for viewing with EDIFICE Connected.
Sending Stopwatch Data to a Phone
●
Use the procedure below to send data from
the watch to a phone.
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
Tapping a stopwatch data item displays
●
its details.
Checking a Lap Time
●
Use EDIFICE Connected to check the data
you sent to the phone.
1. Y
Tap the "EDIFICE Connected" icon.
2. Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
Tapping "Edit" displays a screen that
●
you can use to change the data item
title and to delete lap time data.
Operation Guide 5639
Setting the Alarm
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Configuring World Time
Settings
Specifying a World Time City with EDIFICE
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
EDIFICE Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
Selecting a World Time City
●
1. Y
Tap the "EDIFICE Connected" icon.
2. X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
World Time hour (24-hour)
World Time hour and minute
8