Using The Blender Attachment - Maxwell MW-1151 Manual Instruction

30 seconds while using the blender attachment (1).
Make at least a 4-minute break between the opera-
tion cycles.

USING THE BLENDER ATTACHMENT

Use the removable blender attachment (1) for making
fruit puree, baby food, sauces, mayonnaise, for mixing
various ingredients and making cocktails (for processing
fruit and vegetables containing enough liquid).
WARNING: Before installing the attachment (1), make
sure that the power plug is not inserted into the mains
socket.
– Insert the detachable blender attachment (1) into
– Insert the power plug into the mains socket.
– Immerse the blender attachment (1) into the bowl
ATTENTION!
While processing products keep the unit vertically.
– To switch the unit on, press and hold down the but-
Notes:
– Products should be put into the bowl before the unit
– Before starting to chop/mix, we recommend to peel
– After you finish using the unit, take the power plug
ATTENTION!
– Do not remove the blender attachment (1) during
– To avoid damaging the blades, do not process too
– If the foodstuffs are hard to chop with the blender
W-1151_70 130.indd 13
the motor unit (2), and turn it clockwise as far as
it will go, make sure that the attachment is fixed
properly.
with food that you want to chop/mix.
ton (3).
is switched on. The amount of products to be pro-
cessed should not exceed 2/3 of the capacity of the
bowl in which they are processed.
fruit, remove inedible parts, such as stones, and cut
fruit into 2х2 cm cubes.
out of the mains socket and remove the detachable
blender attachment (1), turning it counterclockwise.
operation.
hard products such as cereals, rice, spices, coffee
beans, hard cheeses, frozen products etc.
attachment (1), add some liquid if possible.
ENGLISH
13
17.04.2019 15:39:05