Maxwell MW-1160 B Manual Instruction page 8

ENGLISH
BLENDER SET
The blender set is intended for beating, mixing,
chopping and combined processing of liquid and hard
products.
Description
1. Detachable blender attachment
2. Motor unit
3. "TURBO" mode button
4. ON button "I"
5. Rotation speed control knob
6. Measuring cup
7. Chopper bowl
8. Chopping knife
9. Geared lid
10. Whisk gear
11. Whisk for beating/mixing of liquid products
SAFETY MEASURES
Before using the unit, read these instructions carefully
and keep them for future reference.
Use the unit according to its intended purpose only, as it
is stated in this user manual.
Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
•
Before connecting the unit to the mains, make sure
that the voltage specified on the unit corresponds to
your home mains voltage.
•
The blender set allows quick and effective opera-
tion, but continuous operation time should not
exceed 30 seconds, the weight of the products to
be chopped in the mini-chopper should not exceed
500 g. Make at least a 3-5 minute break between
operation cycles.
•
Cool down hot products, when using the blender
attachment, temperature of products should not
exceed 70°С.
•
Do not switch the unit on without attachments and
products to process.
•
Do not use the unit outdoors.
•
Do not place the measuring cup and the chopper
bowl in a microwave oven.
•
Use only the attachments supplied.
•
Always unplug the unit before changing the attach-
ments.
•
Before using the unit for the first time, wash all the
removable attachments and bowls that will contact
food thoroughly.
•
Before using the unit, make sure that the attach-
ments are installed properly.
•
Place the chopper bowl on a flat stable surface.
•
Products should be put into the chopper bowl
before the unit is switched on.
•
Do not overfill the chopper bowl with products and
watch the level of liquids.
MW-1160.indd 8
•
The cutting blades of chopping knife of the chopper
and blender attachment are very sharp and danger-
ous. Handle these attachments very carefully!
•
If during the chopper operation rotation of the chop-
ping knife is hindered, unplug the unit and carefully
remove products that prevent blade rotation.
•
Remove products and pour out liquids from the
chopper bowl only after complete stop of the chop-
ping knife.
•
Do not touch the rotating parts of the unit. Do not
let hair or free hanging clothes edges get into the
blade rotating zone of the blender attachment or
the whisk.
•
Never leave the unit connected to the mains unat-
tended.
•
Always unplug the unit before cleaning and when
you do not use it.
•
Unplug the unit by taking the power plug directly. Do
not pull the power cord and do not twist it.
•
Do not put the attachments and bowls in a dish-
washing machine.
•
Do not use the unit near hot surfaces (such as gas
or electric stove, oven).
•
Provide that the power cord does not touch sharp
edges of furniture and hot surfaces.
•
Do not touch the motor unit body, the power cord or
the power plug with wet hands.
•
Do not use the unit if the power cord or the power
plug is damaged.
•
For children safety reasons do not leave polyethyl-
ene bags, used as a packaging, unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film.
Danger of suffocation!
•
Do not allow children under 8 years of age to touch
the motor unit body, the power cord or the plug dur-
ing the unit operation.
•
Do not allow children under 8 years of age to use
the unit as a toy.
•
Close supervision is necessary when children under
8 year of age or disabled persons are near the oper-
ating unit.
•
This unit is not intended for usage by children under
8 years of age.
•
Children aged 8 and over as well as disabled per-
sons can use this unit only under supervision of a
person who is responsible for their safety, if they are
given all the necessary and understandable instruc-
tions concerning the safe usage of the unit and
information about danger that can be caused by its
improper usage.
•
Do not try to repair the unit by yourself. If there are
any damages in the unit, apply to an authorized ser-
vice center.
•
To avoid damages, transport the unit in original
package only.
8
07.11.2013 15:58:17