Adjusting Screen; Zoom Adjustment; Focus Adjustment; Lens Shift Adjustment - Sanyo PLC-XF46E Owner's Manual

BASIC OPERATION
Press ZOOM ▲/▼ button on Side Control or on Remote Control
1
Unit. Message "Zoom" is displayed.
Press ZOOM ▲ button to make image larger, and press ZOOM
2
▼ button to make image smaller.
Press FOCUS ▲/▼ button on Side Control or on Remote Control
1
Unit. Message "Focus" is displayed.
Adjust focus of image by pressing FOCUS ▲/▼ button(s) .
2
1 Press the LENS SHIFT button on Side Control or on the Remote
Control Unit. Message "Lens shift" is displayed.
2 Press POINT UP button to move image up, press POINT DOWN
button to move image down, press POINT LEFT to move image
left and press POINT RIGHT to move image right.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
1
Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 39.) Keystone
dialog box appears.
2 Correct keystone distortion by pressing POINT UP/DOWN
button(s). Press POINT UP button to reduce upper part of
image, and press POINT DOWN button to reduce lower part.
Reduce upper width with POINT UP button.
24

ADJUSTING SCREEN

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

Reduce lower width with POINT DOWN button.
Zoom
Message disappears after 4 seconds.
Focus
Message disappears after 4 seconds.
Lens shift
Message disappears after 4 seconds.
Message disappears after 4 seconds.