Basic Operation; Adjusting Screen; Zoom Adjustment; Focus Adjustment - Sanyo PLC-XP46 Owner's Manual

BASIC OPERATION

Press ZOOM button on Top Control or ZOOM
1
Remote Control Unit. Message "Zoom" is displayed.
Press ZOOM
2
larger, and press ZOOM
make image smaller.
Press FOCUS button on Top Control or FOCUS
1
Remote Control Unit. Message "Focus" is displayed.
Adjust focus of image by pressing FOCUS
2
POINT UP/DOWN button(s) .
NOTE;
Focus adjustment may not function properly if the image is
corrected by KEYSTONE adjustment.
Press LENS SHIFT button on Top Control or LENS SHIFT
1
button on Remote Control Unit. Message "Lens shift" is
displayed.
2 Press POINT UP button or LENS SHIFT
image up, press POINT DOWN or LENS SHIFT
move image down.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 35.) Keystone
dialog box appears.
Correct keystone
2
UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to
reduce the upper part of the image, and press POINT DOWN
button to reduce the lower part. Press POINT LEFT button to
reduce the left part, and press POINT RIGHT button to reduce
the right part.
Reduce the upper width
with POINT UP button.
20

ADJUSTING SCREEN

ZOOM ADJUSTMENT

button or POINT UP button to make image
button or POINT DOWN button to

FOCUS ADJUSTMENT

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

distortion by pressing
Reduce the lower width
with POINT DOWN button.
/ button on
Message disappears after 4 seconds.
/ button on
/ button or
Message disappears after 4 seconds.
/
button to move
button to
POINT
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum
correction.
Reduce the left part with
POINT LEFT button.
Zoom
Focus
Lens shift
Reduce the right part with
POINT RIGHT button.