ESAB Aristo Mig U5000i Instruction Manual page 9

3 TECHNICAL DATA
GMAW (MIG/MAG), SMAW
(MMA), VRD function
2)
deactivated
VRD function activated
Operating temperature
Transportation temperature -4 to 131 °F
Dimensions l × w × h
without cooling unit
with cooling unit
Continual sound pressure
at no-load
Weight
without cooling unit
with cooling unit
Insulation class transformer H
Enclosure class
Application class
1)
Valid for power sources without VRD specification on the rating plate.
2)
Valid for power sources with VRD specification on the rating plate. The VRD function is
explained in the instruction manuals for the control panel, if the panel has that function.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C / 104 °F, or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Cooling power
Coolant
Coolant quantity
Maximum water flow
Maximum number of water-cooled
welding torches that may be connected
0459 087 687
Mig U5000i
59 V
2) < 35 V
14 to 104 °F
(-10 to +40 °C)
(-20 to +55 °C)
24.6 × 15.5 × 19.5 in.
(625 × 394 × 496 mm)
24.6 × 15.5 × 30.6 in.
(625 × 394 × 776 mm)
<70 db (A)
158.7 lb (72 kg)
202.8 lb (92 kg)
IP23
Cooling unit
2.0 kW at 104 °F (40 °C) temp. difference and flow
0.26 gal/min
ESAB's ready mixed coolant
1.5 gal
0.6 gal/min
Two GMAW welding torches or
one GTAW torch and one GMAW welding torch
- 9 -
Mig U5000i WeldCloud™
59 V
< 35 V
14 to 104 °F
(-10 to +40 °C)
-4 to 131 °F
(-20 to +55 °C)
24.6 × 15.5 × 19.5 in.
(625 × 394 × 496 mm)
24.6 × 15.5 × 30.6 in.
(625 × 394 × 776 mm)
<70 db (A)
183 lb (83 kg)
227 lb (103 kg)
H
IP23
© ESAB AB 2017