User Guide; Use Instructions - Teeter FreeStep LT1 Assembly & Use Instructions

Leveling
Figure 25: Make sure your FreeStep is on a flat, stable
surface. Locate the 2 × Leveling Feet as shown. If any of
the feet are not resting flat on the ground, rotate them
clockwise to lower them until they reach the ground.
Transporting
CAUTION
!
The FreeStep weighs over 100.0 lb (45.4 kg) and should be
lifted with caution. Lifting heavy objects can cause injury.
Figure 26: The Transport Wheels are located on the
back of the Rear Stabilizer. To transport, first lift from
the Console Front Support Bar and then from the
Front Crossbar. Move the FreeStep by rolling on the
Transport Wheels as shown.
Water Bottle Holder
Figure 27-28: Enjoy the convenience of easy access to your water bottle and smart device during your workout.
U S ER GUI DE
Figure 27
Device Holder
Figure 25
Figure 26
Figure 28
13