Replacing The Headlight Bulb - Yamaha TW200 Owner's Manual

Periodic maintenance and adjustment
Specified fuse:
1
20.0 A
3. Turn the key to "ON" and turn on
2
the electrical circuits to check if the
devices operate.
3
4. If the fuse immediately blows
again, have a Yamaha dealer
4
check the electrical system.
5
6
7
8
9
10
11
12

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:

Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.

Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
7-35
EAU23817
ECA10651
1. Do not touch the glass part of the bulb.
1. Remove cowling
page 7-9.)
2. Remove the headlight unit by re-
moving the bolts.
1
1. Bolt
3. Disconnect the headlight coupler,
and then remove the headlight
A. (See