Yamaha TW200 Owner's Manual page 60

Periodic maintenance and adjustment
lows.
1
1. Loosen the brake pedal height
locknut.
2 2. To raise the brake pedal, turn the
brake pedal height adjusting bolt in
direction (a). To lower the brake
3
pedal, turn the adjusting bolt in di-
rection (b).
4
5
6
(a)
7
(b)
1
2
8
1. Brake pedal height locknut
2. Brake pedal height adjusting bolt
9
3. Brake pedal height
3. Tighten the locknut.
10
WARNING
11
After adjusting the brake pedal
height, the brake pedal free play
must be adjusted.
12
Brake pedal free play
Measure the brake pedal free play as
shown.
Brake pedal free play:
20.0–30.0 mm (0.79–1.18 in)
Periodically check the brake pedal free
play and, if necessary, adjust it as fol-
lows.
3
1. Brake pedal free play
To increase the brake pedal free play,
turn the brake pedal free play adjusting
EWA11232
nut at the brake rod in direction (a). To
decrease the brake pedal free play,
turn the adjusting nut in direction (b).
1. Brake pedal free play adjusting nut

1


7-23
(a)
1
(b)
WARNING
After adjusting the drive chain
slack or removing and installing
the rear wheel, always check the
brake pedal free play.
If proper adjustment cannot be
obtained as described, have a
Yamaha dealer make this ad-
justment.
After adjusting the brake pedal
free play, check the operation of
the brake light.
EWA10681