Yamaha TW200 Owner's Manual page 31

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to "
3. Turn the main switch on.
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?
YES
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?
YES
The system is OK. The motorcycle can be ridden.
".
NO
NO
NO
4-12
Instrument and control functions
WARNING
If a malfunction is noted, have a Yamaha dealer
check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until checked by
a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until checked by
a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until checked by
a Yamaha dealer.
1
2
3
4
5
6
7
8
9
10
11
12