For Your Safety - Pre-Operation Checks - Yamaha TW200 Owner's Manual

Hide thumbs Also See for TW200:
Table of Contents

Advertisement

For your safety – pre-operation checks
1
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
and maintenance procedures and schedules described in the Owner's Manual.
2
WARNING
3
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in
4
this manual, have the vehicle inspected by a Yamaha dealer.
Before using this vehicle, check the following points:
5
ITEM
Fuel
6
Engine oil
7
8
Front brake
9
10
Rear brake
11
12
Clutch
• Check fuel level in fuel tank.
• Refuel if necessary.
• Check fuel line for leakage.
• Check oil level in engine.
• If necessary, add recommended oil to specified level.
• Check vehicle for oil leakage.
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check lever free play.
• Adjust if necessary.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
• Check operation.
• Check pedal free play.
• Adjust if necessary.
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
CHECKS
5-1
EAU15599
EWA11152
PAGE
4-6
7-12
7-22, 7-25
7-22, 7-25
7-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tw200l1Tw200l1c

Table of Contents