Advertisement
www.insigniashowers.com
Last Modified: 16/02/2022
Step 22 — Installing the heater and heater guard
Locate the heater backplate and screw into position using the
screws provided in the heater box.
Connect the heater hood by clipping it into the heater. Take
the heater and locate it onto the backplate, resting the bottom
within the grooves and securing it in position with a screw
through a pre-made hole in the hood.
Take the heater guard frame and place it around the heater
and screw into position using ST60 Screws.
24
Advertisement
