Extron electronics HDMI 201 Rx User Manual page 26

Reference Information, cont'd
Maximum level (Hi-Z)
HDMI 201 A D TX ............. >11.4 dBu, balanced or unbalanced at
HDMI 201 A D RX............. >5.3 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)
HDMI 201 A D TX ............. >5.1 dBm, balanced or unbalanced at
HDMI 201 A D RX............. >4.7 dBm, unbalanced at 1% THD+N
Control/remote — external device (pass-through)
Serial control port input
Transmitter ......................... RS-232 via (1) 3.5 mm, 3 pole captive screw
Receiver .............................. 1 set of proprietary signals on a female
Serial control port output
Transmitter ......................... 1 set of proprietary signals on a female
Receiver .............................. RS-232 via a 3.5 mm, 3 pole captive screw
N Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations. Captive screw connectors: 1 = TX, 2 = RX,
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, 6 W max.,
Power input requirements ........... 12 VDC, 0.4 A for both transmitter and
N Each transmitter or receiver can be powered either locally by an external
power supply or remotely by receiver or transmitter on the other end of
the CAT 5/5e/6/7 cables.
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
Cooling ........................................... Convection, no vents
HDMI 201 Tx/Rx • Reference Information
A-4
1% THD+N
1% THD+N
>+9 dBm, balanced or unbalanced at 1%
THD+N
connector
RJ-45 jack
RJ-45 jack
connector
3 = GND
external; to 12 VDC, 1A, regulated
receiver
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Mounting
HDMI 201 TX, HDMI 201 RX
Rack mount ................ Yes, with optional 1U, 9.5" deep rack
shelf (RSU 129, #60-190-01; RSB 129,
60-604-01); 1U, 6" deep rack shelf
(RSU 126, #60-190-10; RSB 126 60-604-10);
or VersaTools
(RSF 123, #60-190-20; RSB 123, 60-604-20)
Furniture mount........ Yes, with optional MBU 125 Under-Desk
Mounting Kit, #70-077-01
Pole mount ......................... Yes, with optional PMK 350 mounting kit,
#70-563-02 or -03
HDMI 201 A D TX, HDMI 201 A D RX
Furniture mount........ Wall or furniture mountable in a Decora
style opening
Enclosure type ............................... Metal
Enclosure dimensions
HDMI 201 TX, HDMI 201 RX
1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
HDMI 201 A D TX, HDMI 201 A D RX
Faceplate..................... 2.6" H* x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora
faceplate.)
*Height is 3.8" (9.7 cm) including
mounting tabs.
Device ......................... 2.7" H x 1.8" W x 1.25" D
(6.9 cm H x 4.6 cm W x 3.2 cm D)
(Height excludes mounting tabs, depth
excludes connectors.)
Product weight .............................. 0.5 lbs (0.3 kg)
Shipping weight ............................ 3 lbs (2 kg)
Vibration......................................... ISTA 1A in carton
(International Safe Transit Association)
Regulatory compliance
Safety................................... CE, CUL, UL
EMI/EMC .......................... CE**, C-tick, FCC Class A**, ICES, VCCI
N
**CE and FCC testing is conducted with STP (shielded twisted pair)
cable.
MTBF............................................... 30,000 hours
Warranty......................................... 3 years parts and labor
HDMI 201 Tx/Rx • Reference Information
® 1U, 3.5" deep rack shelf
-
®
A-5