Displaying Two Sources At The Same Time (Pip/Pbp); Working With Hdr Technology - BenQ PD Series User Manual

4. Press the rotation key on Hotkey Puck Gen 2 (as the hot key for KVM Switch by default)
to switch.
Scenario C: Working with two computers and two monitors
USB-C in control
(USB-C)
1. Establish cable connection as instructed in
2. Go to System > Power Awake and make sure it is set to ON.
3. Press the rotation key on Hotkey Puck Gen 2 (as the hot key for KVM Switch by default)
to switch. Instead of using the Hotkey Puck Gen 2, you can set one of the custom keys as
the hot key for KVM Switch after cables are connected. See
page 32 for more information.

Displaying two sources at the same time (PIP/PBP)

To display two input sources on the screen at the same time, you can go for Picture-in-Picture
(PIP) or Picture-by-Picture (PBP) mode.
Video source selection in PIP mode
For first time use, go to Display > PIP, and press the 5-way controller. Your monitor scans for
the available video sources in the following order: USB-C™, DP, and HDMI, and displays the
first available one as the main source in PIP mode, and the second one as the sub source. If only
one input signal is found, connect the desired video source with an appropriate cable, and go to
Display > PIP >
Sub
main source can be changed manually as well.
The monitor keeps the setting of two input sources for future use until the setting is manually
changed.
Go to Display for more adjustments.

Working with HDR technology

The information regarding HDR-compatible devices and content in this document is most up-to-date at the time
of publication. For the latest information, contact your device manufacturer and content provider.
To enable HDR function, you need to have a compatible player and content.
(USB 1 upstream)
(DP)
(The KVM Switch hot key)
to select the sub source manually. Under Display > PIP > Main, the
Switched to be DP in control
or
Establishing KVM connections on page
Customizing the hot keys on
37.
How to adjust your monitor 41