How To Detach The Stand - BenQ PD Series User Manual

How to detach the stand

1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the power cable. Turn off the computer before
unplugging the monitor signal cable.
2. Remove the back cover.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor to
install/remove the I/O cover easily.
Remove the back cover from its bottom as illustrated.
Unplug all cables carefully.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
3. Remove the monitor stand.
While pressing and holding the quick release button,
detach the stand from the monitor.
If the monitor stand is removed for wall mounting, see
the monitor wall mounting kit (purchased separately) on
page 28 and the instruction manual of your wall mount
bracket (purchased separately) for more information.
Using
How to assemble your monitor hardware
2
1
23