BenQ PD Series User Manual page 58

Item
Power Awake By default, this function is disabled, and the USB ports are not
supplied with power while the monitor is in standby mode.
To keep supplying power to the USB ports in monitor's
standby mode, change the setting to ON.
Advanced DDC/CI
Auto Power
Off
DisplayPort Selects an appropriate DP standard for data
OSD Key
Bri.
AMA
System Shows the current monitor property settings.
Setting
58 Navigating the main menu
Function
Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
Sets the time to power off the monitor
automatically in power saving mode.
transmission.
Adjusts the brightness of the power key's LED
indicator.
Improves the gray level response time of the
LCD panel.
Range
• ON
• OFF
• ON
• OFF
• OFF
• 10 min
• 20 min
• 30 min
• 1.1
• 1.4
• ON
• OFF
• OFF
• High
• Premium
• Signal Input
• Timing
• Brightness
• Contrast
• Color Gamut
• Pixel
Encoding
• RGB Range