Advertisement
Quick Links
TROUBLESHOOTING
Why did my monitor not pick up the input
signal automatically?
Most of BenQ monitors have the "Input Auto Switch" option.
By enabling "Input Auto Switch", your monitor automatically chooses the best active input
source based on all the input devices currently connected to the monitor. For example, if your
monitor is connected only through HDMI, it will set the input source to HDMI automatically. If
your monitor is connected through both VGA and HDMI, it will set the input source to HDMI
(which has higher priority than VGA).
Please refer to the User Manual of your BenQ monitor for detailed instructions on how to use
"Input Auto Switch".
There is no sound coming out from my LCD
monitor speaker.
Please check how your BenQ Monitors is connected to the PC. The audio can be transferred
through an HDMI or an audio cable.
My monitor is showing ghosting image (i.e.
when scrolling the text or moving the mouse),
how can I fix this problem?
Please turn OFF the AMA function in the OSD menu
My BenQ monitor doesn't turn on.
Please check if the cable is correctly connected to the power source and try to change the power
cable. If the problem persists, please contact technical support.
Advertisement
Related Manuals for BenQ PD3200U
Summary of Contents for BenQ PD3200U
- Page 1 VGA and HDMI, it will set the input source to HDMI (which has higher priority than VGA). Please refer to the User Manual of your BenQ monitor for detailed instructions on how to use “Input Auto Switch”.
- Page 2 Please try to adjust the refresh rate on your graphic card to an higher level, like 70Hz. This may solve the problem. If the problem persist, please contact BenQ technical support. My BenQ monitor does not display any image when a D-SUB (VGA) cable is connected.
- Page 3 When this function is activated, HDMI or HDMI / MHL port will be in the input auto select loop. Otherwise, HDMI or HDMI / MHL can only be selected by input select.