Adjusting Display Mode; Choosing An Appropriate Picture Mode; Working With Two Video Sources (Kvm Switch) - BenQ AQCOLOR DesignVue PD Series User Manual

4. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.

Adjusting display mode

To display images of aspect ratio other than 16:9 and size other than the panel size of your
purchased model, you can adjust the display mode on the monitor.
1. Press any of the control keys to bring up the hot key menu. Select
the main menu.
2. Go to
Picture Advanced
3. Select an appropriate display mode. The setting will take effect immediately.

Choosing an appropriate picture mode

Your monitor provides various picture modes that are suitable for different types of images.
See Picture Mode on page 41
Go to
Picture Advanced

Working with two video sources (KVM Switch)

If you have two computer systems, you might find yourself busy going back and forth between
two sets of keyboard and mouse to control each display separately. Now with the KVM feature
and sufficient I/O ports on one monitor, you can work with one set of keyboard and mouse
only.
To use KVM Switch feature, toggle between
• >
KVM Switch USB-C
• >
KVM Switch USB Upstream
With appropriate setting, the display is switched to the set input while the keyboard and
mouse control is switched as well. To determine the input, see
source for KVM Switch before use on page
You can designate one of the custom keys to
quickly. See Customizing the hot keys on page
Setting up the second video source for KVM Switch before use
One of the video sources is pre-defined to be transmitted via USB-C™ and cannot be changed.
The other source can come from other available inputs and should be set appropriately in
advance.
1. Connect the second video source to one of the video inputs other than USB-C™ on the
monitor using an appropriate cable.
2. Press any of the control keys to bring up the hot key menu. Select
the main menu.
3. Go to
KVM Switch
4. Change the setting according to your scenario.
and
Display Mode
for all the available picture modes.
and
Picture Mode
USB-C
: Switches to the USB-C™ input.
: Switches to one of the video inputs other than USB-C™.
> .
Video Input
.
for a desired picture mode.
or
USB Upstream
Setting up the second video
31.
to toggle between the options
KVM Switch
30.
( ) to access
Menu
under .
KVM Switch
( ) to access
Menu
How to adjust your monitor 31