BenQ PD Series User Manual page 20

4. Connect the USB devices.
1. Connect the USB cable between the PC and the monitor (via the upstream USB port). This
upstream USB port transmits data between the PC and the USB devices connected to the mon-
itor. Note that this step is not required if the video source is from the USB-C™ inputs.
2. Connect USB devices via other USB ports (downstream) on the monitor. These downstream
USB ports transmit data between the connected USB devices and the upstream port.
3. If you tend to use KVM switch, see
keyboard and mouse (KVM Switch) on page 37
information.
The USB-C™ port on the left or right side works as downstream port and connects with USB devices.
5. Connect the Hotkey Puck G2 to the monitor.
Connect the Hotkey Puck G2 to the mini USB port (exclusively or Hotkey Puck G2 connection) on the
rear of the monitor. For more information on Hotkey Puck G2, see
operations on page
20 How to assemble your monitor hardware
Working with two or more video sources with one set of
2
34.
for appropriate connections and more
2
Hotkey Puck G2 and its basic
1