BenQ PD Series User Manual page 40

Switch from the KVM Switch menu
Go to KVM Switch to manually select a source.
Mode: Adobe RGB
Display
Color
KVM Switch
2
Audio
Custom Key
System
Back
Scenario A: Working with two computers and one monitor
USB-C in control
(USB-C)
1. Establish cable connection to enable KVM function as instructed in
nections on page
2. Go to System > Power Awake and make sure it is set to ON.
3. Press the custom key 2 (as the hot key for Input by default) or the rotation key on Hotkey
Puck Gen 2 (as the hot key for KVM Switch by default) to switch.
Scenario B: Working in PBP mode
USB-C in control
(USB-C)
1. Establish cable connection as instructed in
2. Go to System > Power Awake and make sure it is set to ON.
3. Enable PBP function from Signal Input > PBP. Select sources properly as instructed in
Displaying two sources at the same time (PIP/PBP) on page
40 How to adjust your monitor
USB-C
DisplayPort
USB 1
USB 2 HDMI
Move Confirm
(DP +
USB 1 Upstream)
37.
(DP +
USB 1 upstream)
DisplayPort
HDMI
None
Switched to be DP in control
or
Switched to be DP in control
Establishing KVM connections on page
41.
KVM Switch: ON
If it can't use KVM,
please check
1. Input Source is
connected
2. Select the correct
physical input source
for USB
Establishing KVM con-
37.