How To Detach The Stand And The Base - BenQ XL Series User Manual

How to detach the stand and the base

1. Prepare the monitor and area.
Turn off the monitor and the power before
unplugging the power cable. Turn off the
computer before unplugging the monitor signal
cable.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item
like a towel on the desk for padding, before laying
the screen face down on a flat clean padded
surface.
Lower the end of monitor stand and leave enough
space around the release button so the stand can
be detached easily.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or
damage the monitor surround and controls.
2.Remove the monitor stand.
While pressing and holding the VESA mount
release button (
2
monitor ( and
3.Remove the monitor base.
Raise the thumbscrew lids and release the
thumbscrews as illustrated.
In case you intend to use your monitor on the stand in
the future, please keep the monitor base and monitor
stand somewhere safe for future use.
Turn the base clockwise until you cannot go
further.
As illustrated, when the stand and the base are
unlocked, the arrow on the end of the stand is
aligned to the arrow on the monitor base.
1
), detach the stand from the
3
).
22
Release button
2
3
1
1
2
2