C) Using The Dab Radio - Renkforce RF-ARA-300 Operating Instructions Manual

c) Using the DAB radio

Station search
• If you cannot receive a DAB station after selecting DAB mode, press and hold down the BND/ID3 button (11).
• After that, the device searches for stations in the DAB reception area and saves those found in the station list.
• As the search progresses, display (5) shows the number of stations found.
Station selection
• Repeatedly press the buttons (1) and (9) until the desired station appears on the display (5).
• The device will switch to the selected station after a short time and it will be played.
Station buttons
• Configure the station you want to save.
• The selected station can be saved by long pressing station button 1-6 (12-17).
• You can then select a previously saved station directly by briefly pressing the respective station.
The DAB range has six station buttons. Thus, you can assign up to 6 station buttons.
Calling up station information
• You can display various information about the station that is being played by briefly pressing the
BND/ID3 button (11).
• To switch the display, briefly press the BND/ID3 button (11) again.
• In all cases, different information is displayed for each station.
17