Renkforce RF-ARA-300 Operating Instructions Manual page 23

Accepting/declining an incoming phone call
• When you receive an incoming phone call, display (5) shows the caller's number.
If the caller has blocked their calling line identification or the mobile phone net does not support this feature,
the caller ID will not be displayed.
• To accept an incoming phone call, press the MOD/
• There is a built-in hands-free microphone (6) for the hands-free function on the front panel of the car radio.
• To decline an incoming phone call, press the F/PS/
You can adjust the call volume with the knob (10) during a phone call.
Making a phone call
• Dial any number you want with your mobile phone.
• The car radio automatically switches to Bluetooth
Ending a phone call
• To end a phone call, press the F/PS/
Audio streaming
Audio streaming is the Bluetooth
Owners of an A2DP-capable mobile phone can connect it to the car radio using the pairing function as described
above and send audio data.
• Make sure that both devices were connected via pairing.
• Play an audio file on your mobile phone (refer to the corresponding instruction manual).
• Press the MOD/ button (3) until the display (5) shows "BT".
• Audio transmission is now activated.
• You can now use buttons
the same manner as with USB and SD data carriers.
mode and the called number is shown on the display (5).
®
button (2).
transmission of audio data (music) to the car radio.
®
(1), (9) and 1/ (12) to remotely control the playback of your mobile phone in
button (3).
button (2).
23