Installation Into The Radio Recess - Renkforce CD-3308 Instruction Manual

48 ENGLISH
Mechanical Installation

Installation into the Radio Recess

• Remove the front control panel.
• Carefully remove the plastic frame in the front of the system, by bending it slightly to
the outside and pulling it off from the unit.
1
2
• Remove the two security screws of the CD drive (fig. 1, no. 1).
• Unlock the installation frame with the two unlocking keys (fig. 1, no. 2).
• Remove the installation frame towards the back of the system (fig. 1, no. 3).
• Insert the frame into the respective cut-out in the vehicle (fig. 2).
• Bend down some clips in the installation frame until the frame is securely fastened in
the recess.
• When you have made all the electrical contacts (see "Electric Connection") insert the
CD tuner into the frame until it locks in (fig. 4).
• Replace the frame cover of the front control panel.
Keep the two unlocking keys. You will need them for a later removal of the CD
tuner.
Version 11/06
2
3
1
3
182mm
53mm
4