Dab Radio Operation - Renkforce DAB-RCD3038 Operating Instructions Manual

Operation

DAB Radio Operation

Button functions
• BND/LOU/ENT button (6)
With this button you can select the band range of the DAB radio unit. There are 3 DAB ranges:
DAB1 > DAB2 > DAB3

On each of the band ranges, 6 stations can be stored on the station button 1-6 (26).
•  (15) and  (5) buttons
With these buttons the receiving frequency can be changed to adjust stations in DAB radio operation.
Briefly pushing a button starts the automatic station search (display shows TUNING).
The auto-scan only stops at the next station that can be received well.
• Station buttons 1-6 (26)
If you briefly push these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply push the desired button for more than 1 second.

Every one of the three DAB ranges (DAB1-3) has six station buttons. Therefore you can assign
18 station buttons.
• AS//PS button (23)
When you push the button, all the DAB stations that can be received well are stored on the station storage
buttons 1-6 (26).
• PTY button (24)
Pushing this button displays a list of the DAB stations that can be received.
The different stations are displayed by turning the rotary control VOLUME (4).
The displayed station is selected by pushing the button SELECT (4).
• DSP (12) button
Push this button to call various information (such as transmitter frequency, time, signal quality, signal strength, etc.).
67